2024+ LC250 SDHQ Built Powered Accessory Controller Packages

SDHQ Off Road

2024+ LC250 SDHQ Built Powered Accessory Controller Packages

$2,030.55

SKU: SDHQ-50-3041-U1 | SDHQ-52-1130-250 | SP9100 | SDHQ-50-3041-U1-TK

Include Pass Through Tool Kit For Power Solution Kit Installation?:Yes

Powered Accessory Controller Option:Switch Pros SP9100 + SDHQ Built SP9100 Interior Keypad Mount

Variant

Pickup available at MCQUEEN Usually ready in 24 hours

MCQUEEN

Pickup available, usually ready in 24 hours

190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States

+14806332929

STATE OF CALIFORNIA CONSUMER WARNING

OVERVIEW

If you are planning on adding lights, a compressor, and other electrical accessories to your 2024+ LC250, this is the way to do it. Our SDHQ Built Under Hood Power Solution kit will create a remote battery terminal power source in the engine bay, capable of safely supplying power to anything from rock lights to a winch. The headache of adding accessories in the future is now easier than ever on the LC250, as wiring new parts will be to the SP9100 in the engine bay.

The SDHQ Built Switch Pros SP9100 keypad mount seamlessly installs into your dash to the left of the steering wheel, allowing you to control electrical accessories from one keypad. Not in the vehicle and need to turn something on? The SP9100 is also controllable via Bluetooth through the Switch Pros app.

SDHQ Built 2024+ LC250 Under Hood Power Solution Kit Key Features:

Designed to fit 2024+ LC250
Complete 12-Volt Under Hood Solution
Remote Mount Billet Battery Terminals w/ Protective Boots
1/0 Dual Layer Jacketed Battery Cable (Rated for 350 amps continuous)
Copper Core Pass Through Bushings rated for 440 amps continuous (535 max for 12 min.)
500 amp Fused for shorting protection and use with winches (9% voltage drop @500 amps)
Power Module Mounting:
- - 9100 (multiple mounting options)
Optional Pass Through Tool Kit:
- - ⅛” and 3/16” stubby drill bits
  - 1-¼” Hole Saw
2-3 hour Install Time + any accessory wiring

Installation Instructions

interior mount key features:

3D CAD designed, engineered, & built 100% in-house for the best quality, fit, and finish.
Replaces the factory dash panel to the left of the steering wheel with a Switch Pros 9100 keypad mount.
Carbon Fiber Reinforced Nylon 3D Printed Switch Pros Keypad Mount.
Tight tolerances provide a clean OEM+ fit and finish.
Drilling behind a dash panel is required for installation.
Does not fit the Switch Pros RCR12.

installation instructions

Switch Pros SP9100 Features:

RGB Backlighting
Built-in Bluetooth module for use with free Switch-Pros App
Program and operate your panel from any device with access to the iOS or Google Play Store
Battery Voltage Readout on App screen
Orange LED switch indicators
LED Input Status Indicators for easy troubleshooting on power module

Specifications

125amp capacity with 8 outputs
8 Outputs: 4 rated @ 35A, 4 rated @ 20A
Adjustable Output Overcurrent Values
Switch Panel enclosure measures 4” L x 2” W x .375” H
Power Module Measures 6”L x 3”W x .5”H (excluding connectors)
Power Module Under Hood rating 125°C to -40°C
Switch Panel and Power Module Waterproof rating of IP67

Programming & Other Features

Preset Dimming function WITH MEMORY (100% to 10% brightness)
Master Mode, with ability to turn up to 7 other switches On AND Off with one touch
On/Off or Momentary
Ignition or Battery Input
Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
Automatic Power-Up upon vehicle start up
Time Delay off
No bulky relay box
Two External Trigger inputs can each activate up to four outputs (Active Hi or Active Low)
Low Voltage Disconnect
Sleep Mode for minimal power consumption
Daisy Chain up to 3 Switch Panels to One Power Module

What’s Included?

Switch Panel and Power Module
RCR-Touch®8 cover, snaps on for ease of specific switch selection while wearing gloves or riding rough terrain (United States Design Patent No. US D922,969 S)
11’ of Communication Cable between Switch Panel and Power Module
Power Cable with 125A inline fuse
125 User Selectable Legends included (Horizontal orientation)
Installation brackets and hardware
16-pin color coded output harness
Detailed installation Guide

SHIPPING POLICY
There is a chance that your cart will display no shipping charges. Certain items populate a standard shipping rate, others are advertised as free shipping to the lower 48, and others (often multiple parts or larger orders) may not show a rate. There is nothing more to do on your end if it is free or flat-rate shipping.

If your order does require a shipping cost/option, our shipping department will determine the shipping charges, and we will email you the cost/options for your order to ship out. Once you receive that email, there will be a link to pay for the charges, or you can cancel the order and be fully refunded.

OFFERS OF FREE SHIPPING:
All free ground shipping offers only apply to shipping addresses in the continental United States. This notification will appear above the product information and on the cart page.

FLAT RATE GROUND SHIPPING:
Some products have a standard ground shipping policy if you require the product faster, please notify us in the notes section during checkout.

If you have special shipping requirements, please contact our sales department. Email us help@sdhqoffroad.com

PROCESSING YOUR ORDER:
If shipping costs need to be calculated/added, you will be emailed with an updated link to your order. Your updated order will include your order's shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order, please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.

FIBERGLASS SHIPPING POLICY:
Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer. The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

POWDER COATED ROCK SLIDERS SHIPPING POLICY: While we pack with care, we advise against shipping powder-coated sliders due to the risk of scuffs/scratches during transit. Any shipping-related damage isn't covered by SDHQ.

GOOSE GEAR SHIPPING POLICY: All Goose Gear products are made-to-order. Once your order is placed, it cannot be cancelled or refunded. By checking this box, you acknowledge and agree to these terms. Thank you for understanding the unique nature of our custom manufacturing process.

RETURNS:
Some items may be eligible to be returned if returned as new within 30 days of shipping, with a 20% re-stocking fee. If eligible for return, the return amount will be for store credit. There are NO returns after 30 days from the date of receipt. Freight is nonrefundable. Refunds will be given on parts only and exclude labor or installation charges, shipping, or any other charges. All parts must be returned in the original package, cannot be damaged or installed, and must be in original condition.

For further info on our return policy, please visit the Online order returns page.

We pride ourselves on offering only top-tier products, handpicked through strategic partnerships with the industry's elite.

When you choose us, you're investing in unparalleled quality and craftsmanship.

Learn more about what 'SDHQ Built' means to us here.

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, Shop Pay, PayPal, Apple Pay, Discover and more.

find everything you need?

SDHQ Built Products

Discover the robust, American-made range of SDHQ products, where superior quality meets outstanding performance. Crafted at our headquarters, our gear is built to enhance your driving experience.

A-Pillar Light mounts to fit any light for most models of 4x4 trucks.

A-Pillars

Switch Pro Panels to control all onboard lights and accessories.

Switch Pros

Inexpensive ABS Guards that can save you from expensive repairs.

Abs Guards

American-made Excellence

SDHQ: Built for Adventure

Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.

Check out what 'SDHQ Built' means for us as well as our customers:

sdhq built

Join us